Product ID:EP-CARTRIDGE (BLACK)
MSDS Date:11/13/1987
FSC:6850
NIIN:00F005689
MSDS Number: BTRSY

CANON

30-2 SHIMOMARUKO 3-CHOME, OHTA-KU
TOKOYO JAPAN
JA

Cage: TO787

HEWLETT PACKARD

2197 COLORADO SPRINGS, CO 80901-2035 US

Telephone: 03-3758-2111

Cage: 0G318

STYRENE-ACRYLIC COPOLYMER

CAS: 25767-47-9

Fraction By Weight: 55-65%

IRON OXIDE

CAS: 1317-61-9

Fraction By Weight: 30-40%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3 (FE)

SALICYLIC ACID CHELATE

CAS: 72869-85-3

Fraction By Weight: 1-3%

LD50 LC50 Mixture:NOT GIVEN
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE EFFECTS-EYE CONTACT:IRRITATION.
SKIN CONTACT:LOW HAZARD. INHALATION:GASPING. CHRONIC EFFECTS-NONE
SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:THIS PRODUCT IS NOT LISTED BY IARC, NTP
OR OSHA AS A CARCINOGEN, MUTAGEN, TERATOGEN OR NEUROTOXIN.
Effects of Overexposure:EYE CONTACT:IRRITATION. SKIN CONTACT:LOW
HAZARD. INHALATION:GASPING.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:FIRST AID-EYE CONTACT:FLUSH WITH PLENTY OF WATER. SKIN
CONTACT:WASH WITH SOAP AND WATER. INHALATION:REMOVE TO FRESH AIR.

Flash Point:NONE
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:NONE SPECIFIED BY MANUFACTURER.
Unusual Fire/Explosion Hazard:THIS MATERIAL,LIKE MOST ORGANIC MATERIAL
IN POWDER FORM,IS CAPABLE OF CREATING A DUST EXPLOSION.

Spill Release Procedures:NO TONER SPILLAGE OCCURS IN NORMAL OPERATION
OR HANDLING. IF IT SHOULD OCCUR, AVOID INHALATION OF THE DUST.
SWEEP MATERIAL ONTO PAPER AND PLACE IN FIBER CARTON.

Handling and Storage Precautions:KEEP FROM CONTACT WITH OXIDIZING
MATERIALS.
Other Precautions:KEEP OUT FROM REACH OF CHILDREN.

Respiratory Protection:NONE REQUIRED.
Ventilation:GOOD GENERAL (MECHANICAL) VENTILATION SHOULD BE SUFFICIENT.
Protective Gloves:NONE REQUIRED.
Eye Protection:NONE REQUIRED.
Other Protective Equipment:NONE.
Work Hygienic Practices:WASH WITH SOAP AND WATER AFTER HANDLING PRODUCT
AND BEFORE EATING DRINKING OR SMOKING.
Supplemental Safety and Health
THE TONER POWDER CANNOT BE REMOVED, UNTIL THE CARTRIDGE IS FORCED TO BE
BROKEN.

HCC:N1
Boiling Pt:B.P. Text:NOT GIVEN
Melt/Freeze Pt:M.P/F.P Text:212F,100C
Vapor Pres:NOT GIVEN
Vapor Density:NOT GIVEN
Spec Gravity:1.4-1.6
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:TONER IS FINE POWDER WITH SLIGHT PLASTIC ODOR.
Percent Volatiles by Volume:NEGLIG

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE.

Waste Disposal Methods:THIS PRODUCT IS CONSTRUCTED FROM PLASTICS AND
METALS. DIPOSAL MAY BE SUBJECT TO FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.